2.1 AUSB and 12V outputs (maker)
Opens Amazon search results for this model.
Works with
- 12V lead-acid vehicle batteries
- Automotive shops, fleet service, car dealerships, auto auctions, marinas and implement dealerships
A premium lead-acid jump starter rated at 1700 peak amps and 425 cranking amps.
At a glance
The numbers that matter
Starting rating, as labeled
12 Volt
Peak Amps : 1700; 12 Volt Cranking Amps : 425
Peak amps (maker)
1,700 A
A short burst figure, only where the maker calls it peak; not cranking amps.
Cranking amps (CA, maker)
425 A
Sustained starting current, only where the maker publishes it; not peak amps.
Vehicle system voltage
12 Volt
The electrical systems the maker says it starts, such as 12V cars or 24V trucks.
Weight
23 lb
Warranty (maker)
1 year limited warranty
Features
Is it for you?
A premium lead-acid jump starter rated at 1700 peak amps and 425 cranking amps, with longer 68-inch #2 AWG welding cable leads, dual USB outlets (2.1A and 1.1A), a 12VDC accessory outlet, and dual power modes for extended cranking duration. The JNC770R is designed for automotive shops, fleet service and professional use.
Choose it if these matter
- 68-inch #2 AWG welding cable leads provide extended reach compared to the JNC660's 46-inch cables
- Clore PROFORMER battery technology designed for exceptional cranking power and numerous jumps per charge
- Extended cranking duration makes it suitable for larger engines or difficult cold-weather starts
- 23-pound weight remains manageable for shop and field use
Skip it if these rule it out
- No stated gas or diesel engine rating: Clore publishes no engine-size limit for this model
- Heavier than the JNC660 at 23 lb versus 18 lb, due to larger battery for extended cranking
- No IP rating or stated water/dust protection
- No cold cranking amp (CCA) figure is published
Show all (5)
- No automatic built-in charger mentioned for this premium model
Compare with similar models
| Specification | This oneJNC770R 1700 Peak Amp Premium 12 Volt | JNC660 1700 Peak Amp 12 Volt |
|---|---|---|
| Works with | 12V lead-acid vehicle batteries, Automotive shops, fleet service, car dealerships, auto auctions, marinas and implement dealerships | 12V lead-acid vehicle batteries, Automotive shops, fleet service, car dealerships, auto auctions, marinas and implement dealerships |
| USB and 12V outputs (maker) | Dual USB outlets (2.1A and 1.1A) to power small electronics; 12VDC outlet to power accessories | 12VDC outlet to power accessories |
| Jump starts per charge (maker claim) | Designed to deliver exceptional cranking power, extended cranking duration, numerous jumps per charge and long service life | Able to deliver multiple jumps per charge |
| Clamp cable reach and gauge | 68″ #2 AWG welding cable leads | 46″ #2 AWG welding cable leads |
| Weight | 23 lb | 18 lb |
| Warranty (maker) | 1 year limited warranty | One Year Limited |
| Open | View |
Full specifications (10)
- Peak Amps
- 1700 peak amps
- Cranking Amps
- 425 cranking amps
- Vehicle Voltage
- 12 Volt
- Battery
- Clore PROFORMER battery technology
- Cable Length
- 68"
- Cable Gauge
- #2 AWG
- USB Outputs
- Dual USB outlets (2.1A and 1.1A)
- 12VDC Outlet
- To power accessories
- Weight
- 23 lbs
- Warranty
- 1 year limited warranty
Sources: Jump-N-Carry specifications · cloreautomotive.com. Photos: Jump-N-Carry · cloreautomotive.com. Specifications checked November 16, 2026. Spotted an error? Tell us.

