Opens Amazon search results for this model.
Works with
- 12V lead-acid vehicle batteries
- Automotive shops, fleet service, car dealerships, auto auctions, marinas and implement dealerships
A lead-acid jump starter rated at 1700 peak amps and 425 cranking amps, with a built-in automatic charger, a voltmeter gauge.
At a glance
The numbers that matter
Starting rating, as labeled
12 Volt
Peak Amps : 1700; 12 Volt Cranking Amps : 425
Peak amps (maker)
1,700 A
A short burst figure, only where the maker calls it peak; not cranking amps.
Cranking amps (CA, maker)
425 A
Sustained starting current, only where the maker publishes it; not peak amps.
Vehicle system voltage
12 Volt
The electrical systems the maker says it starts, such as 12V cars or 24V trucks.
Weight
18 lb
Warranty (maker)
One Year Limited
Is it for you?
A lead-acid jump starter rated at 1700 peak amps and 425 cranking amps, with a built-in automatic charger, a voltmeter gauge, 46-inch #2 AWG welding cable leads, and a 12VDC accessory outlet. Built around Clore's PROFORMER battery technology, it is designed for automotive shops, fleet service, car dealerships, towing operations and consumer use.
Choose it if these matter
- Built-in automatic charger keeps the unit always ready without risk of losing a separate charger
- Clore PROFORMER battery is purpose-built for jump starting, delivering consistent power across multiple starts
- Heavy-duty 46-inch #2 AWG welding cable leads provide ample reach for batteries in hard-to-access positions
- Voltmeter gauge gives a clear readout of the onboard battery's charge status
Show all (5)
- 18-pound weight makes it manageable for shop and field use without wheels or a handle
Skip it if these rule it out
- No stated gas or diesel engine rating: Clore publishes no engine-size limit for this model
- Lead-acid chemistry is heavy relative to lithium packs of comparable output, at 18 lb
- No IP rating or stated water/dust protection
- No cold cranking amp (CCA) figure is published
Show all (5)
- No USB charging ports for small electronics; only a 12VDC accessory outlet
Compare with similar models
| Specification | This oneJNC660 1700 Peak Amp 12 Volt | JNC770R 1700 Peak Amp Premium 12 Volt |
|---|---|---|
| Works with | 12V lead-acid vehicle batteries, Automotive shops, fleet service, car dealerships, auto auctions, marinas and implement dealerships | 12V lead-acid vehicle batteries, Automotive shops, fleet service, car dealerships, auto auctions, marinas and implement dealerships |
| USB and 12V outputs (maker) | 12VDC outlet to power accessories | Dual USB outlets (2.1A and 1.1A) to power small electronics; 12VDC outlet to power accessories |
| Jump starts per charge (maker claim) | Able to deliver multiple jumps per charge | Designed to deliver exceptional cranking power, extended cranking duration, numerous jumps per charge and long service life |
| Clamp cable reach and gauge | 46″ #2 AWG welding cable leads | 68″ #2 AWG welding cable leads |
| Weight | 18 lb | 23 lb |
| Warranty (maker) | One Year Limited | 1 year limited warranty |
| Open | View |
Full specifications (11)
- Peak Amps
- 1700 peak amps
- Cranking Amps
- 425 cranking amps
- Vehicle Voltage
- 12 Volt
- Battery
- Clore PROFORMER battery technology
- Cable Length
- 46"
- Cable Gauge
- #2 AWG
- Charger Type
- Automatic
- Indicator Display
- Volt Gauge
- Accessories
- 12VDC outlet to power accessories
- Weight
- 18 lbs.
- Warranty
- One Year Limited
Sources: Jump-N-Carry specifications · cloreautomotive.com. Photos: Jump-N-Carry · cloreautomotive.com. Specifications checked November 16, 2026. Spotted an error? Tell us.

