Opens Amazon search results for this model.
A combined battery charger and jump starter with 1 amp charging capability and up to 1000 amp jump starting power.
- 12V
- 1 A max charge
- 14Ah to 80Ah at 12V batteries
At a glance
The numbers that matter
Battery voltages it charges
12V
Only the voltages listed here are supported; a 12V-only charger is not for 6V or 24V.
Highest charging current (maker)
1 A
Top charging current. Engine-start and boost amps are separate and not counted.
Battery sizes it is rated for (Ah)
14Ah to 80Ah at 12V
The amp-hour capacities the maker rates it to charge or maintain.
Battery types it lists
AGM, GEL, Lithium, Standard
(Sealed or Flooded Lead Acid)
Charge current by mode (maker)
12V @ 1 AMP Charging
AC input (US model)
120V AC
Is it for you?
A combined battery charger and jump starter with 1 amp charging capability and up to 1000 amp jump starting power.
Choose it if these matter
- Compact 1 amp charger combines charging and jump starting capabilities
- 1000 amp jump starting power handles most vehicle engines
- Multiple battery chemistry compatibility
- Spark-proof connection, reverse polarity, short-circuit and overcurrent protection, as listed by Battery Tender
Skip it if these rule it out
- Sold out status indicates limited availability
- Lower 1 amp charging rate means longer charging times
Compare with similar models
| Specification | This oneBattery Tender 1100 | Battery Tender 1120 | Junior 750mA 12V Battery Charger and Maintainer |
|---|---|---|---|
| Battery types it lists | AGM, GEL, Lithium, Standard (Sealed or Flooded Lead Acid) | AGM, GEL, Lithium, Standard (Sealed or Flooded Lead Acid) | AGM, GEL, Standard (Sealed or Flooded Lead Acid) |
| Charge current by mode (maker) | 12V @ 1 AMP Charging | 12V @ 1 AMP Charging | Output: 12V @ 750 mA; Output Current Range: 0 - 2 AMPs |
| Highest charging current (maker) | 1 A | 1 A | Not recorded |
| Battery sizes it is rated for (Ah) | 14Ah to 80Ah at 12V | 14Ah to 80Ah at 12V | 3Ah to 30Ah at 12V |
| Modes and long-term connection (maker's words) | initialization, bulk charge, absorption, and float maintenance stages | four stages — initialization, bulk charge, absorption, and float maintenance | four stages: initialization (tests battery), bulk charge (charges at full 750mA output), absorption (tops off at reduced current), and float maintenance (delivers micro-current only when battery voltage drops below threshold) |
| AC input (US model) | 120V AC | 120V AC | 120V AC @ 50/60Hz |
| Open | View | View |
Full specifications (9)
- Input
- 120V AC
- Charge current
- 12V @ 1 AMP Charging
- Jump starting
- 12V 1000 AMP Jump Starting
- Battery compatibility
- 14Ah to 80Ah at 12V
- Battery types
- AGM, GEL, Lithium, Standard (Sealed or Flooded Lead Acid)
- Charge stages
- moving through initialization, bulk charge, absorption, and float maintenance stages
- Protection features
- Spark-proof connection on both clamp sets; Reverse polarity protection on both clamp sets; Short-circuit protection; Overcurrent protection
- Certifications
- BC, cETLUS (UL1236), cETLUS (UL2743), DOE, FCC, ICES, UN38.3
- Warranty
- 1 Year Manufacturer's Warranty
Downloads & support
Setup: 1A battery charger with 1000 amp jump starter for vehicles. Suitable for 14-80Ah batteries and multiple chemistries. Sold out but not discontinued. No Amazon listing available.
Links go to the manufacturer’s official pages, so you always get the latest, genuine files.
Sources: Battery Tender specifications · batterytender.com. Photos: Battery Tender · batterytender.com. Specifications checked November 17, 2026. Spotted an error? Tell us.


